Laser Materials Guide
This page contains all the power settings that users have found to be the best.
This page also contains a table of setting found to be the best for each type and thickness of material.
Power guide
- 6 turns of knob is about 15mA.
Material / Settings
| Job Type | Material | Thickness | Speed % | Power % | Amp | Repeats / Passes |
|---|---|---|---|---|---|---|
| Vector Cut | Acrylic | 3mm | 30 | 100 | 12-15mA | 2 |
| Vector Cut | Steak | 60 | 11mA | |||
| Vector Cut | Acrylic (Clear) | 4mm | 25 | 100% | 15mA | 3 |
| Vector Cut | Funky Foam | 2mm | 100 | 100% | 3-4mA | 1 |
| Vector Engrave | Cork | 100 | 50% | 2mA | 1 | |
| Vector Cut | Acrylic (JH) | 3mm | 20 | 100% | 15mA | 2 |
| Vector Cut | Acrylic (JH) | 4.8mm | 15 | 100% | 15mA | 2 |
| Vector Cut | Acrylic (JH) | 5.7mm | 13 | 100% | 15mA | 2 |