Laser Cutter rules, costs and management

From BuildBrighton
Revision as of 10:54, 13 August 2011 by Robotix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


  1. Become a member of BuildBrighton
  2. Pay £50 and get trained, more information on Laser Training Here.
  3. When you are trained enter you name here.
  4. Make sure an experienced Laser Operator is around for the first couple of times you use the Laser or until you are fully competent.
  5. Fill out the Laser Log Book here.
  6. Fill out the material guide here for all undocumented settings.
  7. Never cut Vinyl or PVC.
  8. Use the Laser safely and treat it with respect at all times.


£50 For the training for this cool tool that can and will save you lots of time.