Laser Materials Guide

Revision as of 16:04, 13 August 2011 (view source) Robotix (Talk | contribs) ← Older edit		Revision as of 17:58, 11 February 2012 (view source) Tub (Talk | contribs) Newer edit →
Line 14:		Line 14:
	<th width="14%">Power %</th>		<th width="14%">Power %</th>
	<th width="14%">Amp</th>		<th width="14%">Amp</th>
-	<th width="14%">Passes</th>	+	<th width="14%">Repeats</th>
	<tr>		<tr>

---

Revision as of 17:58, 11 February 2012

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

• 6 turns of knob is about 15mA.
  

Material / Settings

Job Type	Material	Thickness	Speed %	Power %	Amp	Repeats
Vector Cut	Acrylic	3mm	30	100	12-15mA	2
Vector Cut	Steak		60		11mA