Difference between revisions of "Laser Materials Guide"

From BuildBrighton
Jump to: navigation, search
m
Line 14: Line 14:
 
<th width="14%">Power %</th>
 
<th width="14%">Power %</th>
 
<th width="14%">Amp</th>
 
<th width="14%">Amp</th>
<th width="14%">Repeats</th>
+
<th width="14%">Repeats / Passes</th>
  
 
<tr>
 
<tr>

Revision as of 02:44, 14 February 2012

Laser.jpg

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Repeats / Passes
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA