Difference between revisions of "Laser Materials Guide"

From BuildBrighton
Jump to: navigation, search
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
{{header}}
 
{{header}}
== Power guide ==
+
[[File:Laser.jpg|thumb]]
 +
This page contains all the power settings that users have found to be the best.<BR><BR>
 +
This page also contains a table of setting found to be the best for each type and thickness of material.<BR>
 +
= Power guide =
 
* 6 turns of knob is about 15mA.<br>
 
* 6 turns of knob is about 15mA.<br>
  
 
= Material / Settings =
 
= Material / Settings =
 
<table width="100%" Border="1">
 
<table width="100%" Border="1">
<th width="14%">Job Type
+
<th width="14%">Job Type</th>
<th width="16%">Material
+
<th width="16%">Material</th>
<th Width="14%">Thickness
+
<th Width="14%">Thickness</th>
<th width="14%">Speed %
+
<th width="14%">Speed %</th>
<th width="14%">Power %
+
<th width="14%">Power %</th>
<th width="14%">Amp
+
<th width="14%">Amp</th>
<th width="14%">Passes
+
<th width="14%">Repeats / Passes</th>
  
 
<tr>
 
<tr>
<td>Vector Cut
+
<td>Vector Cut</td>
<td>Acrylic  
+
<td>Acrylic</td>
<td>3mm
+
<td>3mm</td>
<td>30
+
<td>30</td>
<td>100
+
<td>100</td>
<td>12-15mA
+
<td>12-15mA</td>
<td>2
+
<td>2</td>
 +
</tr>
  
 
<tr>
 
<tr>
<td>Vector Cut
+
<td>Vector Cut</td>
<td>Steak
+
<td>Steak</td>
<td>
+
<td></td>
<td>60
+
<td>60</td>
<td>
+
<td></td>
<td>11mA
+
<td>11mA</td>
<td>
+
<td></td>
 +
</tr>
 +
 
 +
<tr>
 +
<td>Vector Cut</td>
 +
<td>Acrylic (Clear)</td>
 +
<td>4mm</td>
 +
<td>25</td>
 +
<td>100%</td>
 +
<td>15mA</td>
 +
<td>3</td>
 +
</tr>
 +
 
 +
<tr>
 +
<td>Vector Cut</td>
 +
<td>Funky Foam</td>
 +
<td>2mm</td>
 +
<td>100</td>
 +
<td>100%</td>
 +
<td>3-4mA</td>
 +
<td>1</td>
 +
</tr>
 +
 
 +
<tr>
 +
<td>Vector Engrave</td>
 +
<td>Cork</td>
 +
<td></td>
 +
<td>100</td>
 +
<td>50%</td>
 +
<td>2mA</td>
 +
<td>1</td>
 +
</tr>
  
 
</table>
 
</table>
 +
[[Category:Laser]]

Revision as of 15:23, 13 June 2012

Laser.jpg

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Repeats / Passes
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA
Vector Cut Acrylic (Clear) 4mm 25 100% 15mA 3
Vector Cut Funky Foam 2mm 100 100% 3-4mA 1
Vector Engrave Cork 100 50% 2mA 1