Laser Materials Guide

Revision as of 15:57, 13 August 2011 (view source) Robotix (Talk | contribs) ← Older edit		Revision as of 15:57, 13 August 2011 (view source) Robotix (Talk | contribs) Newer edit →
Line 1:		Line 1:
	{{header}}		{{header}}
-	[[File:Laser.jpg|thumb]]	+	<center>[[File:Laser.jpg]]</center>
	= Power guide =		= Power guide =
	* 6 turns of knob is about 15mA.<br>		* 6 turns of knob is about 15mA.<br>

---

Revision as of 15:57, 13 August 2011

Power guide

• 6 turns of knob is about 15mA.
  

Material / Settings

Job Type	Material	Thickness	Speed %	Power %	Amp	Passes
Vector Cut	Acrylic	3mm	30	100	12-15mA	2
Vector Cut	Steak		60		11mA