Laser Materials Guide
Line 1: Line 1:
{{header}}
{{header}}
[[File:Laser.jpg|thumb]]
[[File:Laser.jpg|thumb]]
 +
This page contains all the power settings that users have found to be the best.<BR><BR>
 +
This page also contains a table of setting found to be the best for each type and thickness of material.<BR>
= Power guide =
= Power guide =
* 6 turns of knob is about 15mA.<br>
* 6 turns of knob is about 15mA.<br>
Line 6: Line 8:
= Material / Settings =
= Material / Settings =
<table width="100%" Border="1">
<table width="100%" Border="1">
-
<th width="14%">Job Type
+
<th width="14%">Job Type</th>
-
<th width="16%">Material
+
<th width="16%">Material</th>
-
<th Width="14%">Thickness
+
<th Width="14%">Thickness</th>
-
<th width="14%">Speed %
+
<th width="14%">Speed %</th>
-
<th width="14%">Power %
+
<th width="14%">Power %</th>
-
<th width="14%">Amp
+
<th width="14%">Amp</th>
-
<th width="14%">Passes
+
<th width="14%">Passes</th>
<tr>
<tr>
-
<td>Vector Cut
+
<td>Vector Cut</td>
-
<td>Acrylic  
+
<td>Acrylic</td>
-
<td>3mm
+
<td>3mm</td>
-
<td>30
+
<td>30</td>
-
<td>100
+
<td>100</td>
-
<td>12-15mA
+
<td>12-15mA</td>
-
<td>2
+
<td>2</td>
 +
</tr>
<tr>
<tr>
-
<td>Vector Cut
+
<td>Vector Cut</td>
-
<td>Steak
+
<td>Steak</td>
-
<td>
+
<td></td>
-
<td>60
+
<td>60</td>
-
<td>
+
<td></td>
-
<td>11mA
+
<td>11mA</td>
-
<td>
+
<td></td>
 +
</tr>
</table>
</table>
 +
[[Category:Laser]]

Revision as of 16:04, 13 August 2011

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Passes
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA
Retrieved from "http://www.buildbrighton.com/wiki/Laser_Materials_Guide"