Laser Materials Guide
Line 44: Line 44:
<td>15mA</td>
<td>15mA</td>
<td>3</td>
<td>3</td>
 +
</tr>
 +
 +
<tr>
 +
<td>Vector Cut</td>
 +
<td>Funky Foam</td>
 +
<td>2mm</td>
 +
<td>100</td>
 +
<td>100%</td>
 +
<td>3-4mA</td>
 +
<td>1</td>
 +
</tr>
 +
 +
<tr>
 +
<td>Vector Engrave</td>
 +
<td>Cork</td>
 +
<td></td>
 +
<td>100</td>
 +
<td>50%</td>
 +
<td>2mA</td>
 +
<td>1</td>
</tr>
</tr>
</table>
</table>
[[Category:Laser]]
[[Category:Laser]]

Revision as of 20:23, 13 June 2012

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Repeats / Passes
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA
Vector Cut Acrylic (Clear) 4mm 25 100% 15mA 3
Vector Cut Funky Foam 2mm 100 100% 3-4mA 1
Vector Engrave Cork 100 50% 2mA 1
Retrieved from "http://www.buildbrighton.com/wiki/Laser_Materials_Guide"