Laser Materials Guide

From BuildBrighton
Revision as of 15:23, 13 June 2012 by Talkingjazz (Talk | contribs)

Jump to: navigation, search

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Repeats / Passes
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA
Vector Cut Acrylic (Clear) 4mm 25 100% 15mA 3
Vector Cut Funky Foam 2mm 100 100% 3-4mA 1
Vector Engrave Cork 100 50% 2mA 1