Laser Materials Guide

From BuildBrighton
Revision as of 12:58, 11 February 2012 by Tub (Talk | contribs)

Jump to: navigation, search

This page contains all the power settings that users have found to be the best.

This page also contains a table of setting found to be the best for each type and thickness of material.

Power guide

  • 6 turns of knob is about 15mA.

Material / Settings

Job Type Material Thickness Speed % Power % Amp Repeats
Vector Cut Acrylic 3mm 30 100 12-15mA 2
Vector Cut Steak 60 11mA