Laser Materials Guide
Revision as of 15:23, 13 June 2012 by Talkingjazz
This page contains all the power settings that users have found to be the best.
This page also contains a table of setting found to be the best for each type and thickness of material.
- 6 turns of knob is about 15mA.
Material / Settings
|Job Type||Material||Thickness||Speed %||Power %||Amp||Repeats / Passes|
|Vector Cut||Acrylic (Clear)||4mm||25||100%||15mA||3|
|Vector Cut||Funky Foam||2mm||100||100%||3-4mA||1|