Order History

 
Line 20: Line 20:
Replacement Laser fitted March 2013. Supplier ??
Replacement Laser fitted March 2013. Supplier ??
-
Replacement Final Mirror fitted after orignal was scratched May 2013. This was bought on ebay by Toby.
+
Replacement Final Mirror fitted after original was inadvertently scratched while being cleaned April 2013. This was bought on ebay by Toby.
-
Replacement mirrors (3) ordered from FSL 10 July 2013. The mirrors were ordered afte the first mirror was found to be cracked and as a result machine was inoperative.
+
Replacement mirrors (3) ordered from FSL on 10 July 2013. The mirrors were ordered after the first mirror was found to be cracked and as a result machine was inoperative. Cracking seemed to a result of a deposit on the mirror causing it to heat up.
 +
<br>
 +
This suggests a schedule of checking and cleaning of mirrors is appropriate to avoid recurrence.
<br>
<br>
-
The mirrors are apparently glass, 2m diameter and coppery reflective surface.
+
The mirrors are apparently glass, 2cm diameter with a coppery reflective surface.
===Red Laser===
===Red Laser===
This is an HPC LS 3020 with NewlyDraw software for operating the machine.
This is an HPC LS 3020 with NewlyDraw software for operating the machine.
Bought privately second hand May 2013.
Bought privately second hand May 2013.

Current revision as of 11:46, 11 July 2013

Contents

Order History

This page logs significant orders so that:

  • Repeat orders are a bit easier (supplier details and cost recorded)
  • Issues with the stuff ordered can be recorded (e.g. so we can invoke warranty)
  • We know when stuff was ordered and the full history (e.g. frequency of replacement etc)


Laser Cutter


White Laser

Originally obtained via Full Spectrum Laser FSL in Las Vegas USA while the hackspace was at the Skiff. It came with Retinascribe card and retinascribe software for operating the machine.
Contact email: Support, FSL [[email protected]]
Website: http://fslaser.com/

Replacement Laser fitted March 2013. Supplier ??

Replacement Final Mirror fitted after original was inadvertently scratched while being cleaned April 2013. This was bought on ebay by Toby.

Replacement mirrors (3) ordered from FSL on 10 July 2013. The mirrors were ordered after the first mirror was found to be cracked and as a result machine was inoperative. Cracking seemed to a result of a deposit on the mirror causing it to heat up.
This suggests a schedule of checking and cleaning of mirrors is appropriate to avoid recurrence.
The mirrors are apparently glass, 2cm diameter with a coppery reflective surface.

Red Laser

This is an HPC LS 3020 with NewlyDraw software for operating the machine. Bought privately second hand May 2013.