Difference between revisions of "User:James"

From BuildBrighton
Jump to: navigation, search
(Home Energy/Environment Monitor)
Line 2: Line 2:
  
  
James wasn't introduced to a soldering iron until he was in his teens. Since the end of his GCSEs he hasn't really used one much either. But starting in 2008 he found an interest in it again and has since been dabbling in home automation and environmental sensing.
+
I wasn't introduced to a soldering iron until I was in his teens. Since the end of my GCSEs I have really used one much either. But starting in 2008 I found an interest in it again and I've since been dabbling in home automation and environmental sensing.
 +
 
 +
== Blog ==
 +
 
 +
What I'm currently working on and documentation enough to build it independently (I hope) is on the blog http://wwww.queeg.org/
  
 
== Home Energy/Environment Monitor ==
 
== Home Energy/Environment Monitor ==
Line 8: Line 12:
 
[[File:15082009173.jpg|thumb]]
 
[[File:15082009173.jpg|thumb]]
  
At the moment I am trying to build an ethernet device controlled by a Atmel AVR using the enc28j60 chip. Not the easiest way to do it but it does give you a breadboard with lots of wires coming out of it looking quite impressive.
+
At the moment I am working on devices that have a vaguely green angle. Including AVR programming, wireless communications, 1-Wire, temperature and humidity sensing, power control and power usage sensing.
 
+
The eventual aim is to have a board that will monitor my home energy usage, individual appliance power usage, temperature and humidity throughout my house and report it to a central server. From there I may look into controlling the dehumidifier and boiler from the micro-controller.
+
  
Insperation and information for this project comes from the data sheets and [http://www.tuxgraphics.org/electronics/200606/article06061.shtml tuxgraphics.org].
+
The eventual aim is to have a collection of collaborating devices that can report on environmental conditions and control the power to devices automatically (such as the dehumidifier) and manually (such as the TV). From there I may look into moving the boiler to computer control.
  
I've also found an interesting project [http://openenergymonitor.org/emon/node/28 here]
+
I've found an interesting project [http://openenergymonitor.org/emon/node/28 OpenEnergyMonitor] and will be using ideas from there and other locations.
  
Page of links from a tweet by @jayfresh http://homecamp.pbworks.com/Open-Power-Meter
+
Page of links from a tweet by @jayfresh http://homecamp.pbworks.com/Open-Power-Meter.
  
 
== Sounding Balloon ==
 
== Sounding Balloon ==

Revision as of 10:05, 15 January 2010

James Grant

I wasn't introduced to a soldering iron until I was in his teens. Since the end of my GCSEs I have really used one much either. But starting in 2008 I found an interest in it again and I've since been dabbling in home automation and environmental sensing.

Blog

What I'm currently working on and documentation enough to build it independently (I hope) is on the blog http://wwww.queeg.org/

Home Energy/Environment Monitor

15082009173.jpg

At the moment I am working on devices that have a vaguely green angle. Including AVR programming, wireless communications, 1-Wire, temperature and humidity sensing, power control and power usage sensing.

The eventual aim is to have a collection of collaborating devices that can report on environmental conditions and control the power to devices automatically (such as the dehumidifier) and manually (such as the TV). From there I may look into moving the boiler to computer control.

I've found an interesting project OpenEnergyMonitor and will be using ideas from there and other locations.

Page of links from a tweet by @jayfresh http://homecamp.pbworks.com/Open-Power-Meter.

Sounding Balloon

Who doesn't want to launch a telemetry payload to the edges of space (well 30km anyway)?

I know I do. I've started collecting information needed and at the moment, so long as I don't get distracted by something else shiny, I aim to get it going for summer 2010.

UAV

Just an idea at the moment but it would be cool if, instead of building a wheeled robot, I built a flying robot. It could take pictures from the sky.

This would use a lot of the same tools and skills as the Sounding Balloon but also a whole lot more.

  • ArduPilot An Arduino platform based autopilot.
  • DIY Drones The place on the Internet to find information about UAVs.